密冲掺铒光纤放大器


Amonics' Pulse EDFA is designed for amplifying optical short pulse to high pulse energy level. Amonics' engineers have a lot of knowledge in designing pulse optical amplifier, especially handling the nonlinearity in optical fiber due to high pulse peak power of the optical short pulse. We can design custom pulsed EDFA for different applications, such as fiber optic sensing and free space optical sensing. Our pulse EDFA has been widely used in industrial fiber laser based Lidar systems for wind velocity detection.

規格

AEDFA-PS AEDFA-PM-PS
Operating wavelength 1540 to 1560nm 1540 to 1560nm
Saturated Output Power up to (at 10mW peak input power) 40dBm (50ps pulse width, 100MHz rep rate), >25dBm (50ps pulse width, 10MHz rep rate) 40dBm (50ps pulse width, 100MHz rep rate), >25dBm (50ps pulse width, 10MHz rep rate)
Input Signal Peak Level +10dBm +10dBm
Pulse Repetition Rate 1MHz to 100GHz 1MHz to 100GHz
Noise figure Max. 7.5dB Max. 7.5dB
Input / Output isolation Min. 30dB Min. 30dB
Polarization dependent gain Typ. 0.3, Max. 0.5dB NA
Polarization mode dispersion Typ. 0.3, Max. 0.5ps NA
Polarization Extinction Ratio NA Typ. 23dB, Min. 20dB
Optical Fiber SMF-28 PM 1550 Panda Fiber
Different output power models are available upon request

参数

unit value
Operation Temperature °C 0 to +40
Storage Temperature °C -10 to +70
Power Supply VAC 90 – 240, 47 – 63Hz
Benchtop Dimensions mm 260(W) x 330(D) x 120(H)
Control Keylock switch, Pump laser current
LCD Display Output power, Pump laser current, Input power (Optional)
Computer Interface RS232 (Remote control software & connection cable included) / Ethernet (Option)
Protection Pump laser over heat warning
Optical Connector FC/APC, FC/UPC, SC/APC, SC/UPC, collimator, bare fiber (No output connectors for output power >2W)

选项

Pulse picker for low repetition rate down to 100kHz

订购信息

Product Code
AEDFA(-PM)-PS-www-xx-yy-B-zz
www : Pulse Width in ps
xx: Repetition Rate in MHz
yy: Average Output Power in dBm
zz: FA for FC/APC, FC for FC/UPC, SA for SC/APC, SC for SC/UPC, CL for collimator, NC for bare fiber


特点

High output power
High gain
Wide operation rage
Highly reliable and durable






Top